You can customize the picture quality by adjusting picture profile items such as [Gamma]
and [Detail]. When setting these parameters, connect the camera to a TV or monitor, and
adjust them while observing the picture on the screen.
1. MENU → (Camera Settings) → [Picture Profile] → the profile you want to change.
2. Move to the item index screen by pressing the right side of the control wheel.
3. Select the item to change using the up/down sides of the control wheel.
4. Select the desired value using the up/down sides of the control wheel and press in
the center.
Using the preset of the picture profile
The default settings [PP1] through [PP7] for movies have been set in advance in the camera
based on various shooting conditions.
MENU → (Camera Settings) → [Picture Profile] → desired setting.
PP1:
Example setting using [Movie] gamma
PP2:
Example setting using [Still] gamma
PP3:
Example setting of natural color tone using the [ITU709] gamma
PP4:
Example setting of a color tone faithful to the ITU709 standard
PP5:
Example setting using [Cine1] gamma
PP6:
Example setting using [Cine2] gamma
PP7:
Example setting using [S-Log2] gamma
Items of the picture profile
Black Level
Sets the black level. (–15 to +15)
Gamma
Selects a gamma curve.
Movie: Standard gamma curve for movies
To Next Page
Loading...
