GB
18
Setting the language and the clock
1
Press the ON/OFF (Power) button.
Language setting screen is displayed when you turn on the camera for the
first time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language, then press z on the control
wheel.
Date & Time setting screen is displayed.
3
Check that [Enter] is selected on the screen, then press
z.
4
Select a desired geographic location by following the
on-screen instructions, then press z.
5
Set [Daylight Savings], [Date/Time] and [Date Format],
then press z.
• When setting [Date/Time], midnight is 12:00 AM, and noon is
12:00 PM.
6
Check that [Enter] is selected, then press z.
Control wheel
ON/OFF (Power)
Select items: v/V/b/B
Set the numeric value of date and
time:
v/V//
Set:
z
Power/Charge lamp (green)
To Next Page
