The shooting mode is set to [Intelligent Auto], [Superior Auto], [Scene Selection], or [Sweep
Panorama].
When the flash is used, the product performs flash bracket shooting, which shifts the
amount of flash light even if [Cont. Bracket] is selected. Press the shutter button for each
image.
[99] How to Use
Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Single Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and
then to lighter. Press the shutter button for each image. You can select an image that suits
your purpose after recording.
1. MENU → (Camera Settings) → [Drive Mode] → [Single Bracket].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Single Bracket: 0.3EV 3 Image:
This setting shoots a total of three images in a row with an exposure value shifted by plus or
minus 0.3 EV.
Single Bracket: 0.3EV 5 Image:
This setting shoots a total of five images in a row with an exposure value shifted by plus or
minus 0.3 EV.
Single Bracket: 0.3EV 9 Image:
This setting shoots a total of nine images in a row with an exposure value shifted by plus or
minus 0.3 EV.
Single Bracket: 0.7EV 3 Image:
This setting shoots a total of three images in a row with an exposure value shifted by plus or
minus 0.7 EV.
Single Bracket: 0.7EV 5 Image:
This setting shoots a total of five images in a row with an exposure value shifted by plus or
minus 0.7 EV.
Single Bracket: 0.7EV 9 Image:
This setting shoots a total of nine images in a row with an exposure value shifted by plus or
minus 0.7 EV.
To Next Page
Loading...
