Sony DSC-RX1RM2 - Settings for Bracket

LPF Bracket
Shoots a total of three images with [LPF Effect] set to [Standard], [High], and [Off] for one
image each.
1. MENU → (Camera Settings) → [Drive Mode] → [LPF Bracket].
Note
The shooting order used by [LPF Bracket] cannot be changed.
When using a flash (sold separately) to shoot in the [LPF Bracket] mode, press the
shutter button for each image.
[103] How to Use
Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Settings for bracket shooting
You can set the self-timer in bracket shooting mode, and the shooting order for exposure
bracketing and white balance bracketing.
1. MENU → (Camera Settings) → [Drive Mode] → select bracket shooting mode.
2. MENU → (Camera Settings) → [Bracket Settings] → desired setting.
Menu item details
Selftimer during Brkt:
Sets whether to use the self-timer during bracket shooting. Also sets the number of seconds
until the shutter is released if using the self-timer.
(OFF/2 Sec/5 Sec/10 Sec)
Bracket order:
Sets the order of exposure bracketing and white balance bracketing.
(0→-→+/-→0→+)
Note
The shooting order used by [LPF Bracket] cannot be changed.