Chapter 3 Using the Unit as a Player in an Editing System
34
GB
Chapter 3 Using the Unit as a Player in an Editing System
Settings on editing controller
For details on the settings of the editing controller, refer to “Adjusting an
Edit Timing” on page 40.
Settings on the DSR-40/40P (player) and DSR-85/85P (recorder)
Switch recorder player
REMOTE/LOCAL REMOTE REMOTE
For details, refer to the instruction manual of DSR-85/85P.
About reference video signals
In order to provide stable video and audio signals for analog editing, it is
necessary for the built-in time base corrector (TBC) to operate correctly.
To ensure this, input a reference video signal synchronized with the video
signal to the REF. VIDEO INPUT (IN) connector.
Connections for a Cut Editing System
To Next Page
