Sony DVS-2000C - Page 102

(16) ASSIGN OUTPUT RE {16)Set the ASSIGN OUTPUT
(BKDS-206048 i Fe 2 B27E) (When using the BKDS-2060)
; @ On the initial set-up screen, press the function keys inthe
@ MHBMOREDS. rv 7yvavx—-eKOMEC — following order.
ite (OUTPUT) -> (ASSIGN)
4] (OUTPUT) - [F5] (ASSIGN)
haan OUTPUT % = pare had,
The ASSIGN OUTPUT menu is displayed.
OUT D-ASGN A-ASGN
ASIGN PGM EDPVW
@® (D-ASGN) LHL. ALP FXOVTANAVISS @ Press (D-ASGN) to select the signal output from
DIGITAL ASSIGN OUTPUTS2 47 YROWDT SESE . the DIGITAL ASSIGN OUTPUTS connector on the
ERT 2. switcher rear panel.
ETE OCU FOMCHIAD ) BHS, Every time [F2] is pressed, the setting nanos in the
following order.
:PGM (program) video output signal
:PGM (program) key output signal
:PGM/PST (DSK is not inserted) video output signal
:PGM/PST (DSK is not inserted) key output signal
:DSK PVW (preview) video output signal
:Processed video output signal
:Processed key output signal
‘EDIT PVW (edit preview) bus output video signal
@ Wei [FB] (A-ASGNEMIL, A4 9Fx-OYTAR © Press (A-ASGN) to select the signal output from the
W124 SANALOG ASSIGN OUTPUTS 2 RZ 7 PSH ANALOG ASSIGN OUTPUTS connector on the switcher.
FSESCBRTS. rear panel.
eT LOCA FOMCHDAH ) HHS, Every time is pressed, the setting changes in the
following order. -
PIRGM VT TPGMRT IGEN CERT EY PROC-V ROG Kee
DVS-2000C 2-51
AOTTANEE ttt