Sony DVS-2000C - Page 103

INN
(17)
FIRES
Ott
7A
CEST
STE
@
PWHHOREPS,
Fry
7
yave—-eEKOMFT
TT,
(OUTPUT)
—
[F6]
(THRU)
OUTPUT
THROUGH
MODE
=
2.-
RAR
SNS,
out XPT ---THRU
THRU 19 OFF
(17)Set the Synchronized Signal Change
@
On
the
initial
set-up
screen,
press
the
function
keys
in
the
following
order.
(OUTPUT)
->
(THRU)
The
OUTPUT
THROUGH
MODE
menu
is
displayed.
+ OUTPUT--THRU
PGH Orr
ee iene
@ [F2] KPHEMLEROAUXNAWOBMT SKS vi
L, BETSPUARAY HRP YEBRTS.
BRENT OAKAY bRY VORA [F2] WH
RREND.
BRLAZUARAY
ee
Y
ORE
[F3] OHM RASENS.
® [3] THRU) EL, AMES ORTRA Rou TRET
Bo
“HT 7% UION OFFI) BS.
ON : BRM ETT SLEV
OFF: MSS ZT 2S
®
Le
acl
pel
RET
SMNES
CERT
2S.
Hp
ORA
[FS]
OMHKRRSHS.
[FA]
tHTK
OIL
LAF
OMA
CHADD
9
HHS.
@ Press [F2] (XPT) with pressing an AUX bus button to
select the output to be set.
The selected crosspoint button number is displayed on
the screen over [F2]. The setting of the selected
crosspoint button number is displayed on the screen
over [F3]
®
Press
[F3]
(THRU)
to
set
the
synchronized
elon
change.
Every
time
[F3]
is
pressed,
the
setting
changes
between
ON
and
OFF.
ON
:
Not
change
the
synchronized
signal
OFF
:
Change
the
synchronized
signal
@ Press (OUTPUT) to select the output signal to be
set.
The output setting is displayed on the screen over [F5].
Every time is pressed, the output changes in the
following order.
rf EDPVWID-ASGNT A-ASGN AUT AUKE FAUXS F
®
(THRU)
238.
BBE
SOMIEA
KOM
TTHS.
EET
7:
UNLON
OFFI)
BOS,
ON
:
RMB
S
EHSL
S
OFF:
HIRES
2824
rem
[FS]
)¢
Hi
[F5]
ORE
Ae
LONI
RE
ERTVSBSOA,
MMESEHIBAPCEH
SI
xt.
2-52
® Press (THRU) to set the synchronized signal
change.
Every time is press, the setting changes between
ON and OFF.
ON: Not change the synchronized signal
OFF : Change the synchronized signal
The sync signal in the input signai is only passed.
through on the output signal if both input ( ) and
output ( ) settings are to ON.
DVS-2000C