Sony DVS-2000C - Page 25

wx suaes ill
Section 1 OPERATION
1-18
1B ABNOR ERLE
Section 1 OPERATION
1-2-2 @iB/NAIL
@ primary INPUTS 1 - 16
@ pcm outputs
© assicn outputs ---
© aux outputs
@ ReF INPUTS
@ REF OUTPUT
1-2-2 Rear Panel
: 'VZA3IN
gt SO
= i?
ud — %/Ground
iB) (-2/L/Rear panel
@ PRIMARY INPUTS(754 ZU -AA)1 ~1 68 F
(BNC)
BRE CL U TAF LY FER EF ey YRNMANTCEETOA
~4Ie+). BFE O OBKDS-2020BKOMAUAAIL KD. &
KOK eV RILECOAAMARBIROET, Ere. WG
) OBKDS-2022BROMAAAI KD, FHUFAYRK—
RY PE FABSW/R-V/B-Y HKUST PF USA-{S
(KEY)
#
S25
4
VY
FLANCE
ET.
FOR,
BKDS-2022
SMUIKBKDS-2021BMEBStTSL.
XSIYVUTNFY
RNAS EQ eV RVANCEET.
@ PGM OUTPUTS (70975 4H) sHF (NCB)
RA y Fe — CHR LEBEN 7 UTS AHS &
VUF NFU SNLEFABSE UTHALET, 320inF
BRSO,
EHFRTISFAENSH—,
VIRGE
BRL
ET.
© ASSIGN OUTPUTS (74-4 + FIVEA) SF(BNCE)
FFE
O
DBKDS-2060BROMAIAAIL
KD.
2Fxe
van
DYYTNFY SMES ELF eV RNOTHUSAYR—
RY MEBEMHLET. SMFS CS MNOMS
(PGM, PGM KEY, EDIT PVW, CLEANH 2 2)id,
TY hU-MNELOK y by SX =H a—CRRL EF.
PR Mi Rue
Section 1 OPERATION
@ PRIMARY INPUTS connectors 1 to 16 (BNC)
Input up to 4 serial digital video signals (connectors 1 to
4). You can input up to 16 channels of serial digital
signals after installing optional BKDS-2020 boards. By
installing the optional BKDS-2022 board, you can input
2 channels of analog component video (Y/R-Y/B~Y) and
key (KEY) signals. By adding the optional BKDS-2021
board to the BKDS-2022 board, you can also input a
further 2 channels of serial digital signals.
© PGM (program) OUTPUTS connectors (BNC)
Output the final (program) video created with the
switcher as a serial digital or analog video signal. There
are three connectors, which can be connected to program
monitors, VTRs and so on.
© ASSIGN (assignable) OUTPUTS connectors
(BNC)
Output 2 channels of serial digital signals and 1 channel
of analog component signals when the optional BKDS-
2060 board is installed. Use the setup menu to select
output signals such as PGM, PGM key, EDIT PV W and
CLEAN for output from these connectors.