Sony DXC-325P - Filter Selection

Video Monitor Adjustment Z
When a color video monitor is being used to monitor a
picture, adjust the color of the monitor as follows.
Set the BARS/WB selector to BARS.
Adjust the color and hue controls on the
monitor while viewing the color bars on the
monitor screen.
Set the BARS/WB selector to AUTO.
Filter Selection
The color temperature changes according to lighting
conditions. To compensate this, use the color temperature
conversion filter indicated in the table below.
Filter number
__ Lighting conditions
lodine lamp, sunrise, sunset
Bright outdoor
Cloudy, rainy
If the selected filter is not suitable for the lighting conditions,
a warning such as “:LOW LIGHT” will be shown on the
viewfinder screen. For details on the warning, refer to
“Warning Indicators and Character Display” on page 1-27.
DXC - 325 (UC)
DXC-325P (EK) 1-19