To Next PageTo Next Page
Need help?Do you have a question about the Sony DXC-D50 and is the answer not in the manual?
General| Signal System | NTSC/PAL |
|---|---|
| Minimum Illumination | 0.5 lux |
| Sensor Type | 3 CCD |
| Lens Mount | B4 |
| Lens Mount Type | Bayonet |
| Lens Mount Size | B4 |
| Weight (without lens) | 2.4 kg |
| Weight (body only) | 2.4 kg |
| S/N Ratio | 60 dB |
| Signal-to-Noise Ratio | 60 dB |
| Sensitivity | F11 (at 2000 lux) |
| Horizontal Resolution (TV Lines) | 500 TV Lines |
FCC compliance and operational guidelines for US customers.
CE marking compliance and European standards for EU customers.
Description of controls and indicators on the front panel of the unit.
Description of connectors located on the rear panel of the unit.
Details of system diagnostics spread across multiple pages.
Results of self-diagnosis for the unit's internal boards.
Status of various boards, diagnostics page, and error handling procedures.
General safety warnings and a section to record product information.
Highlights of the DXC-D50/D50P/D50WS/D50WSP series and its CCD technology.
Specific features for the wide-screen DXC-D50WS/D50WSP models.
Detailed identification and function of parts on the camera head.
Explanation of buttons, knobs, and indicators on the right side of the camera head.
Description of various switches and dials on the camera head for operation.
Identification and function of controls and connectors on the front of the camera.
Details of fittings, connectors, and viewfinders on the left and upper sides.
Explanation of the lens connector and remote control unit connector.
Detailed description of the controls and rings on the VCL-920BY zoom lens.
Explanation of lens controls including focus, zoom, aperture, and macro functions.
Identification and function of controls, indicators, and connectors on the viewfinder.
Explanation of viewfinder indicators, controls, and connector.
Procedure for replacing the camera's internal lithium battery for date/time data retention.
Step-by-step instructions for replacing the camera's lithium battery.
General procedures for connecting the camera to external devices.
Step-by-step guide for initial camera setup and shooting operations.
Detailed steps for setting filters, white balance, focus, and starting recording.
Guidance for shooting operations when using the DSR-1/1P DVCAM camcorder.
Description of the four types of indication screens shown on the viewfinder.
Detailed explanation of normal and status indications displayed on the viewfinder.
Explanation of indicators shown during normal camera operation, including VTR status.
Details on tape status, error indications, and VTR operation for DSR-1/1P.
Explanation of audio levels, tape remaining, lens f-stop, and clock indications.
Introduction to menu operations, including displaying menus and the TOP MENU.
Detailed steps for adjusting parameters within the selected menu items.
Operations for registering items, changing order, and deleting pages in the USER menu.
Summary of file operations: scene files and setup files for camera settings.
Using Command Link to control multiple cameras from a single RCP unit.
Procedures for releasing security code locks and handling forgotten codes.
Instructions for recovering from forgotten security codes by resetting the unit.
Explanation of scene files and setup files for camera settings.
Ensuring correct color rendering by adjusting white balance based on lighting.
How to save and restore white balance values in memory.
Procedure for manual and automatic white balance adjustment.
Using preset white balance settings and troubleshooting.
Explanation of light sources, color temperature, and ATW function.
Importance and procedure for correct black balance adjustment.
Settings for electronic shutter speed and Clear Scan function.
Instructions for using the CLS function and exiting settings.
How to set the camera's internal clock and timestamp recordings.
Procedure for adjusting the flange focal length of the lens.
Methods for adjusting aperture and designating lenses.
How to adjust aperture sensitivity and designate lenses.
Procedure for macrophotography and adjusting image size.
Detailed technical specifications of the camera head.
Specifications for the VCL-920BY Zoom Lens and DXF-801/801CE Viewfinder.
Details on studio equipment, cables, and miscellaneous accessories.
Steps for setting security codes to lock Engineer mode and panel operations.
