Need help?Do you have a question about the Sony DXC-637 and is the answer not in the manual?
Warning about components critical to safe operation and proper replacement.
Details the six models and their included components.
Covers important notes, shipping, care, and operating problems.
Describes signal-to-noise ratio, resolution, DCC+, digital enhancer, sensitivity.
Details easy mode, focus, gain, hyper gain, auto white balance, auto iris.
Identifies parts on the camera head, including side views.
Details the VCL-916BYA zoom lens controls and connectors.
Describes the DXF-601/601CE viewfinder controls and indicators.
Step-by-step guide for attaching a VTR to the camera unit.
Procedure for attaching the VCL-916BYA zoom lens to the camera head.
Instructions on how to detach the viewfinder from the camera.
Covers fitting optional microphone holders and microphones.
How to connect an optional LCD color monitor for viewing.
Guide for connecting a portable VTR using camera adaptors.
Procedures for connecting multiple cameras with or without a CCU.
Instructions on charging, fitting, and indications for battery packs.
How the camera adaptor receives power from connected devices.
Step-by-step guide for setting up and starting a recording.
How to monitor return video or E-E video signals.
Using the REC REVIEW button to playback recorded segments.
Overview of normal, status, basic, and advanced menu indications.
Details settings for iris, detail, pedestal, shutter, and gain.
Covers settings for marker, zebra, DCC+, EVS, and more.
Procedures for adjusting and saving white balance values.
Steps for performing black balance adjustment for optimal video.
Configuration of electronic shutter speed and clear scan function.
Procedure to adjust flange focal length for sharp focus.
Describes automatic, manual, and instant automatic iris adjustment modes.
Instructions for close-up shooting using the macro function.
Adjustments for specific shooting conditions like bright backgrounds or spotlights.
Explains viewfinder and VTR warnings for faults and low battery.
Technical details for the DXC-637/637P Camera Head.
Technical details for the VCL-916BYA Zoom Lens.
Technical details for the DXF-601/601CE Viewfinder.
Identifies major boards and connectors within the camera unit.
Steps for safely removing the camera's outer cabinet.
Detailed procedure for replacing the CCD unit and related board.
Pin assignments and specifications for main camera connectors.
Lists connector types, part numbers, and cable assemblies.
Explains functions of switches on IE-47 and PR-209 PC boards.
Details switches on SW-724 and EN-122 boards for adjustments.
Lists necessary test equipment for camera alignment procedures.
Diagram and notes for connecting test equipment to the camera.
Recommended initial switch settings on camera and boards for alignment.
General notes and precautions to follow during the alignment process.
Adjusting the color bar signal levels for NTSC and PAL output.
Calibrating camera sensitivity using a white object and specific light.
Measuring gamma and gradation using a grayscale chart.
Adjusting the sub-carrier frequency for NTSC and PAL signals.
Adjusting the SC-H phase relationship for sync signal accuracy.
Adjusting carrier balance for optimal color signal reproduction.
Calibrating the BARS signal levels using an oscilloscope.
Adjusting color vectors for accurate color representation.
Adjusting the INT CB Y signal levels for proper video processing.
Setting the Y level for component video output.
Adjusting the R-Y signal level for component video.
Adjusting the B-Y signal level for component video.
Adjusting the 1H and 2H gain for video signal processing.
Calibrating the G-channel video signal level.
Calibrating the R and B channel video signal levels.
Adjusting the pedestal level for proper black level representation.
Initial adjustments for gamma balance and setting.
Fine-tuning gamma balance for R and B channels.
Adjusting the flare compensation circuit for improved image clarity.
Adjusting the knee point for highlight control.
Adjusting the Dynamic Contrast Control (DCC) for optimal image.
Adjusting the white clip level to prevent signal clipping.
Adjusting the pre-clip level to minimize carrier leakage.
Adjusting the High Frequency (HF) offset for signal integrity.
Adjusting HF aliasing to minimize unwanted artifacts.
Adjusting the aperture circuit for image sharpness.
Calibrating black balance for accurate dark area reproduction.
Adjusting detail (DTL) crispening and aliasing.
Adjusting the detail (DTL) limiter for signal control.
Adjusting horizontal and vertical detail ratio for equal levels.
Adjusting the overall detail level of the image.
Adjusting for optimal performance in low light conditions.
Calibrating the automatic iris control for brightness.
Adjusting the size of characters displayed in the viewfinder.
Adjusting the tone level for audio output.
To Next Page
General
