Sony DXC-325P - Tilting and Zooming; Scene Composition and Framing

Tilting |—-moving the camera vertically
Tilting shots with the camera should be slightly faster
than pans.
To emphasize
height... ---
tilt up.
To emphasize the
final part of the
j scene..
a tilt down.
[ Zooming |—changing the size of the subject
Because telephoto shots make camera shake more
noticeable, the camera should be as stable as
possible.
To draw attention to To end the shot by
something specific... making the
zoom in. circumstances
surrounding the scene
understood... zoom out.
DXC -325 (UC)
DXC- 325P (EK)
Sizing the scene-mixing long,
medium and close-up shots
Continuous use of long shots or close-ups will give
your productions a monotonous “flat” impression. To
avoid this, it is important to consider exactly what it is
that you wish to “say” with every shot. Indeed, it is
possible to change the impression that any subject
makes merely by changing the way it’s shot.
8 2772
You don’t have to change the subject to alter the
scene-you can achieve a different effect by changing
the size of the subject itself within the scene.
Framing people
Basic shots for properly framing people are shown
below.
Experience has shown that shots that frame people
differently than this do not have as pleasant an effect.
Face shot
Even if you cut off the hairline, don’t cut off the chin.
When shooting a profile,
leave the space in front of
the face to create a “sight
line.”
Bust shot— Waist shot—
Chest and above Upper hips and above
Knee shot— Full shot—
Knees and above Entire body
HEATH
1. GENERAL DESCRIPTION