Sony EV-S350 - Page 29

VIDEO
t
|
}
LINE OUT
AUDIO
Editing a home movie tape from this unit to another
VCR
1
4
5
Turn
on
the
power
of
the
equipment
to
be
used.
Insert
the
original
cassette
to
this
unit
and
a
new
cassette
to
another
VCR.
Set the input select switch of another VCR to
LINE.
Set this unit to the playback pause mode and
press the EDIT button. The EDIT indication will
light in the display window.
Set another VCR to the recording pause mode.
Release the pause modes simultaneously.
The EDIT button
When editing a tape, press this button so that the EDIT
indication lights in the display window. Deterioration of
picture
quality
will
be
avoided.
Press
again
after
editing.
The SHARPNESS control will not function when the EDIT
button is pressed.
Notes
Avoid repetition of editing tapes, as the picture and tone
quality will be impaired noticeably for newly edited tapes.
When you make the recording and playback connections
simultaneously to the same VCR, noise may come out.
When another VCR is a monaural type, use the optional
RK-C72 connecting cable.
29