2. Menu Operation Instruction
After the monitor is properly connected to the power supply, the
indicator light is on (red). Long press button to turn on the
monitor, the indicator light turns yellow. After the signal is connected,
the indicator light turns green.
After startup, short press to select to turn the screen
touch function on or off.
2.1 Touch Screen Menu Operation (turn on the screen touch
function)
①．Double-click on the screen to open the main menu (show on the
left side of the screen) and click on the corresponding menu to
display the secondary menu. You can enter the corresponding
function option to select or set with the "<" or ">" key of the
option. Exit the menu and press key of the main menu or
click the touch screen.
②．When the menu is not displayed, swipe up from the bottom of the
screen to open the shortcut menu, and click on the
corresponding menu box to open or set the corresponding
function.
③．When the menu is not displayed, on the left side of the screen (1/2
split screen), you can directly adjust the brightness of the screen
backlight; on the right side of the screen (1/2 split screen), you
can directly adjust the volume.
To Next Page
Loading...
