_> Changing the mode settings
4 Once copying is completed, the message "COMPLETE"
is displayed.
To copy images to another floppy disk, select "CONTINUE" with the
control button and repeat the operations in steps 2 through 4 above.
To discontinue copying, select "EXIT" with the control button.
Notes
• When you copy to the floppy disk which is a small remaining capacity,
'DISK FULL" may appear on the LCD screen.
•To discontinue copying on a floppy disk half\ray (in the middle of the above
steps flora 1 through 4), mm oft the camera.
Select this item to delete a displayed image(s)
To delete an image(s), select the desired delete option fi'om the menu
while the image(s) is displayed on the LCD screen.
LIn SINGLE screen mode ]
<OK/CANCEL>
•Select OK to delete displayed image.
• Select CANCEL to cancel deleting image.
LIn INDEX screen mode ]
<ALL/SELECT>
•Select ALL to delete all the in-lages or1 the floppy disk.
• Select SELECT to delete selected images.
@ Use the control button to display the red _ mark at the
image you want to delete.
The selected image number reverses color. To cancel selection, press
the control button again. The image number display retnrns to
normal.
@ Select "ENTER" with the control button, then press it.
To cancel deleting image, select "CANCEL" with the control button,
the press it. The screen retmns to the menu screen.
Notes
• Once you delete an image, you cannot restore it. Check the images to delete
careflflly before deleting them.
• Even when you select "ALL", you cannot delete the protected image.
• When you select "SELECT", you cannot select a protected image.
28-GB
To Next Page
Loading...
