137
“Memory Stick
” Operations
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on a “Memory Stick.”
Before operation
Insert the recorded cassette and a “Memory Stick” into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press . The picture recorded on the tape is played back.
(2) Press
again to pause playback at the scene where you want to start
recording from.
(3) Press START/STOP. Images and sound are recorded on the “Memory Stick.”
To stop recording, press START/STOP again. See page 119 for details on
recording time.
[a] Available recording time on the “Memory Stick”
[b] This indicator appears for about 5 seconds after you press START/STOP. This
indicator is not recorded.
[c] Current recording folder
Notes
•Sound recorded in 48 kHz is converted to one in 32 kHz when recording images from
the tape to the “Memory Stick.”
•Sound recorded in stereo is converted to monaural sound when recording from the
tape.
Recording a picture from a tape as a
moving picture
1,2
320
50min
REC
BBB
N
15sec
0:00:03
0:15:42:43
[b]
3
[a]
[c]
101
LOCK
MEMORY
CAMERA
VCR
(CHG)OFF
POWER
To Next Page
Loading...
Need help?
General
