126
Recording images continuously
You can record still images continuously. Select one of the three modes described below
before recording.
NORMAL [a] (DCR-TRV740/TRV840 only)
Your camcorder shoots up to four still images in 1152 × 864 size or 13 still images in 640
× 480 size at about 0.5 sec intervals. ( )
EXP BRKTG (Recording image size is 640 × 480) (DCR-TRV740/TRV840 only)
Your camcorder automatically shoots three images at about 0.5 sec intervals at different
exposure. ( )
MULTI SCRN (Recording image size is 640 × 480) [b]
Your camcorder shoots nine still images at about 0.4 sec intervals and displays the
images on a single page divided into nine boxes. ( )
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select STILL SET in
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select BURST (DCR-TRV740/TRV840 only)
/PIC MODE (DCR-TRV340 only), then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(6) Press MENU to make the menu settings disappear.
(7) Press PHOTO deeper.
Recording still images on “Memory Stick”s
– Memory Photo recording
[a] [b]
To Next Page
Loading...
Need help?
General
