156
For Windows users
Recommended Windows environment
OS: Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000
Professional, Windows XP Home Edition or Windows XP Professional
standard installation is required.
However, operation is not assured if the above environment is an
upgraded OS.
CPU: MMX Pentium 200 MHz or faster
The USB connector must be provided as standard.
Windows Media Player must be installed (to play back moving pictures).
Installing the USB driver
Before connecting your camcorder to your computer, install the USB driver on the
computer. The USB driver is packaged together with application software for viewing
images on the CD-ROM supplied with your camcorder.
If you installed the USB driver in “Viewing images recorded on tape on your computer”
(p. 96), start from step 5.
For Windows XP users
The USB driver needs not be installed. Your computer is automatically recognized as a
driver just by connecting your computer using the USB cable.
For Windows 98/98SE/Me, Windows 2000 Professional users
If you are using Windows 2000 Professional, log in with permission of administrator.
Start the following operation without connecting the USB cable to your
computer.
Connect the USB cable in step 6.
If the USB driver has been registered incorrectly because your computer was
connected to your camcorder before installation of the USB driver was completed.
Reinstall the USB driver following the procedure on page 158.
(1) Turn on the power of your computer and allow Windows to load.
(2) Insert the supplied CD-ROM into the CD-ROM drive of your computer. The
application software screen appears.
Viewing images recorded on “Memory Stick”s on your computer
To Next Page
Loading...
Need help?
General
