65
Advanced Playback Operations
You can enlarge moving and still images recorded on tapes.
Besides the operation described here, your camcorder can enlarge still images recorded
on “Memory Stick”s (except DCR-TRV240) (p. 166).
(1) In the playback or playback pause mode, press PB ZOOM. The image is
enlarged, and R r indicators which showing the direction to move the image
appear on the screen.
(2) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
R : The image moves downwards.
r : The image moves upwards.
(3) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
T : The image moves rightward (Turn the dial downwards.)
t : The image moves leftward (Turn the dial upwards.)
(4) Except DCR-TRV240:
Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from 1.1 times up to five times its size.
W : Decreases the zoom ratio.
T : Increase the zoom ratio.
To cancel the PB ZOOM function
Press PB ZOOM to turn off the indicator.
Enlarging recorded images
– Tape PB ZOOM
3
4
2
PB ZOOM
× 5.0
[
EXEC
]
: T t
PB ZOOM
× 5.0
[
EXEC
]
: r R
1
PB ZOOM
To Next Page
Loading...
Need help?
General
