Sony HCD-H77 - Page 13

Playing in a Desired Order
— Program Play
(HCD-H70/H77/H1 400)
You can make a program for up to 20
selections in the order you want them to be
played.
1 Insert the disc.
2 Press PROGRAM.
PGM appears in the display.
3 Press the numeric buttons for the
desired selection in the desired order
to be programmed.
Last programmed selection
[Eq Total playing time of selections
Programmed selection numbers
4 Press >.
To stop playing
Press Wf.
To restart the same program play, press >.
To resume normal play
Press CONTINUE.
The program is erased and the play
continues in the normal play mode.
If ‘‘—--” is displayed
e You have programmed a selection
number over 20.
¢ The total time has exceeded 100 minutes.
POWER
ON
To check your program (HCD-H70/H77/
H1400)
(Remote commander only)
Press CHECK on the remote commander
As you press it, the track numbers appear
in the order in which they are programmed.
At the last selection, "End" appears in the
display window.
To add a selection to the end of the
program
Follow the same procedures as “Playing in
a Desired Order” while the unit is in the stop
mode.
You cannot add selections during play.
To erase the entire program
Press lf once during stop; twice during play.
The program is also erased when you press
to open the tray or turn off the system.
To erase a particular selection in the
program (HCD-H70/H77/H1400)
(Remote commander only)
1 Press CHECK to display the track
number to be erased.
2 Press CLEAR.
To check the remaining time
Press TIME once to see the remaining time
of the selection being played; twice to see
the total remaining time of the programmed
selections; once more to return to the initial
display.
TIME CONTINUE KO >i
OOVTH/00ZTH/ZZH/0ZH/99H"G9H