HCD-M40D/M60D/M80D
7
NOTE OF REPLACING THE IC3501 (M80D), IC3502,
IC3503 (M60D, M80D) AND IC2002 ON THE MOTH-
ERBOARD BOARD AND THE COMPLETE MOTHER-
BOARD BOARD
When IC3501 (M80D), IC3502, IC3503 (M60D, M80D) and
IC2002 on the MOTHERBOARD board and the complete MOTH-
ERBOARD board are replaced, it is necessary to spread the com-
pound between parts and heat sink. After that, execute “IC and
MOTHERBOARD Board after replace checking guide” in page
31.
Part No. Description
7-300-009-67 THERMAL COMPOUND (TIG2000)
Spread the compound referring to the fi gure below.
– MOTHERBOARD Board (M80D) (Component Side) –
IC3501 IC3502 IC3503 IC2002
thermal compound (TIG2000)
– MOTHERBOARD Board (M60D) (Component Side) –
IC3502 IC3503 IC2002
thermal compound (TIG2000)
– MOTHERBOARD Board (M40D) (Component Side) –
IC2002
thermal compound (TIG2000)
To Next Page
Loading...
