Sony HT-BE1 - 1 Servicing Note; Extension Cable and Service Position

3
HT-BE1/SA-WBE1/SS-BE1
1-1. EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connecting the jig (extension cable) as shown below.
• Connect the MAIN board (CN801) and the DISPLAY board (CN701) with the extension cable (Part No. J-2501-049-A).
SECTION 1
SERVICING NOTE
J-2501-049-
A
MAIN board
(CN801)
DISPLAY board
(CN701)