11
GB
Getting Started
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Name Function
Q DISPLAY Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (N)
at the same time to display
TV’s information on the TV
screen.
R TOOLS/
OPTIONS
Press to display and select the
options of the DVD player or
Blu-ray disc player.
Press TOOLS/OPTIONS and
TV (N) at the same time to
display the options applicable
to the Sony TV.
S -/-- Press to select the channel
entry mode, either one or two
digit of the VCR.
Press -/-- and TV (N) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR Press to clear a mistake when
you press the incorrect
numeric button.
T Numeric
buttons
(number 5*)
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press
0/10 to select track number
10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (N) at the same time to
select the TV channels.
U SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
V TV INPUT Press TV INPUT and TV (N)
at the same time to select the
input signal (TV input or
video input).
To Next Page
Loading...
Need help?
General
