19
GB
Getting Started
If you connect a Blu-ray disc
player
• Be sure to change the factory setting of the
DVD/BD input button on the remote so that
you can use the button to control your Blu-
ray disc player. For details, see “Changing
button assignments” (page 49).
• You can also rename the DVD/BD input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
(page 47).
Notes
• To input multi channel digital audio from the DVD
player or Blu-ray disc player, set the digital audio
output setting on the DVD player or Blu-ray disc
player. Refer to the operating instructions supplied
with the DVD player or Blu-ray disc player.
• To output sound from the front speakers and the
subwoofer only when you select DVD/BD input,
be sure to:
– connect your DVD player or Blu-ray disc player
to the DIGITAL COAXIAL DVD/BD IN jack
on the receiver.
–press 2CH.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
player/Blu-ray disc player and satellite tuner/set-
top box to the TV, so that the image is displayed on
the TV. Refer to the operating instructions of each
component connected for details.
Tips
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
• To output the sound of the TV from the speakers
connected to the receiver, be sure to:
– connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
– turn off the TV’s volume or activate the TV’s
muting function.
To Next Page
Loading...
