29
GB
Playback
Watching a DVD/Blu-ray disc
O
VIDEO IN/
PORTABLE AUDIO IN/
AUTO CAL MIC
PHONES
INPUT SELECTOR
A.F.D. MOVIE MUSIC
?/1
DIMMER SLEEP 2CH
DISPLAY
MASTER VOLUME
INPUT MODE
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
SLEEP
TV INPUT
VIDEO DVD/BD SAT TV
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING – TUNING +
REPLAY ADVANCE
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
D.TUNING
AUTO CAL
D.SKIP
SA-CD/CD TUNER
?/1
.
HmM
<
<
>
5
TOOLS/
OPTIONS
TV
?/1
AV
?/1
MEMORY
MENU/HOME
-/--
>10/
2
3
6
6
3
Notes
• Refer to the operating
instructions supplied with the
TV and DVD player/Blu-ray
disc player.
• Check the following if you
cannot listen to multi channel
sound.
– Be sure this receiver is
connected to the DVD player/
Blu-ray disc player via a
digital connection.
– Be sure the digital audio
output of the DVD player/
Blu-ray disc player is set up
properly.
Tips
• Select the audio format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer to
page 40 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
1 Turn on the TV and DVD player/Blu-ray disc
player.
2 Turn on the receiver.
3 Press DVD/BD.
You can also use INPUT SELECTOR on this receiver to
select “DVD/BD”.
Be sure to change the factory setting of the DVD/BD input
button on the remote so that you can use the button to
control your Blu-ray disc player. For details, see
“Changing button assignments” (page 49).
4 Switch the input of the TV so that an image
of the DVD/Blu-ray disc is displayed.
If no image is displayed on the TV screen, make sure that
the video output of the DVD player or Blu-ray disc player
is connected to the TV.
5 Play back the disc.
6 Adjust to a suitable volume.
7 After you have finished watching the DVD/
Blu-ray disc, eject the disc and turn off the
receiver, TV and DVD player/Blu-ray disc
player.
To Next Page
Loading...
