Sony HXR-NX80 User Manual

In the playback mode, audio signals sent from the system processor (IC6000) through I2S communication are converted
to analog signals in the audio signal processor IC (IC8500). The converted analog signals are output from the line/
headphone/speaker output amplifier in the IC, and are finally output through the line output connector (CN0802/IR-1009
board), headphone connector (J4001), and speaker connector (CN4702/CK-1019 board) to the external as sound.
Furthermore, beep sound generated by the system processor (IC6000) is output from the headphone or speaker in the
same way.
Composite VIDEO block
Composite video signals that are output from the VDAC macro in the system processor (IC6000) are amplified in the
Video AMP IC (IC1101), and are then output through the line output connector (CN0802/IR-1009 board) to the external
monitor.
Manual dial block
Manual dial (AD47100) operation signals are input through the 6-pin connector (CN4003) to the TPU macro in the
system processor (IC6000).
eMMC block
Programs for the system processor (IC6000) are stored in the eMMC IC (IC6280).
Front-end block
The front-end IC (IC6300) receives video signals from the 1.0 type stacked CMOS image sensor and sends them to the
system processor (IC6000) with the MIPI interface.
The front-end IC (IC6300) is also able to perform processing (including digital clamp processing, NR processing, image
plane phase difference pixel correction processing, and data buffering when reading the image sensor high frame rate
using the PoP-mounted DRAM).
System control block
The system processor (IC6000) contains ARM Cortex-A5 MPCore for controlling peripheral devices. This processor
also contains an image processing engine and an HEVC/AVC Codec engine.
In addition, this processor contains interface macros for peripheral devices such as MIPI interface, VDAC, HDMI
interface, Digital Panel interface (for both LCD and EVF), BEEP AUDIO, I2S interface, USB interface, UART interface,
SIO interface, SPI interface (NFC interface), eMMC interface, MS interface, SD interface, WLAN interface (SD
interface), 12-bit A/D converter, I2C interface, GPIO interface, SIRCS interface, and lens driver control interface.
HXR-NX80/HXR-MC88
5-16

Sony HXR-NX80 Specifications

General

Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Video resolutions	1280 x 720, 1440 x 1080, 1920 x 1080, 3840 x 2160 pixels
Maximum frame rate	120 fps
Supported video modes	1080p, 2160p
Video formats supported	AVC, AVCHD, H.264, MPEG4
Maximum video resolution	3840 x 2160 pixels
Audio system	Dolby Digital 2.0
PCM digital audio	16-bit/48 kHz
Built-in microphone	Yes
Audio formats supported	LPCM
Digital zoom	- x
Optical zoom	12 x
Focal length range	9.3 - 111.6 mm
Interchangeable lens	-
Focal length (35mm film equivalent)	32.8 - 393.6 mm
Camera shutter speed	1/10000 s
Display diagonal	3.46 \
Display resolution (numeric)	1560000 pixels
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Sensor type	CMOS
Total megapixels	14.2 MP
Optical sensor size	1 \
PictBridge	No
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Memory slots	2
Camcorder media type	Memory card
Compatible memory cards	SD, SDHC, SDXC
Internal storage capacity	- GB
Battery type	NP-FV70A
Battery voltage	7.4 V
Battery capacity	- mAh
Battery life (max)	4.4 h
Battery technology	Lithium
Focus adjustment	Auto/Manual
Closest focusing distance	0.01 m
Viewfinder type	Electronic
Viewfinder resolution	2360000 pixels
Viewfinder screen size	0.39 \
Camcorder type	Handheld camcorder
Minimum illumination	1.7 lx
Product color	Black
Cables included	USB
Number of batteries included	1 pc(s)
Maximum image resolution	- pixels

Weight and Dimensions

Depth	287 mm
Width	130 mm
Height	181.5 mm
Weight	1320 g