Sony HXR-NX80 - Manual Lens Ring Block; ZM-1005 Board

5-3. Manual Lens Ring Block
5-3-1. ZM-1005 Board
The PI sensor output of the manual lens ring on the LSV-1730E lens is received by the 6-pin connector (CN4503) on
the ZM-1005 board, and this output signal is converted to a digital signal by the comparator IC (IC4501). This digital
signal is output from the 61-pin connector (CN4502) to the VC-1045 board.
HXR-NX80/HXR-MC88
5-3