Sony ICD-P620 - Utilizing the Menu Function; Selecting the Display Mode

ICD-P620 GB 3-295-268-11 (2)
35
GB
Utilizing the Menu Function
Utilizing the Menu Function
Selecting the Display
Mode
You can select the display mode for the
stop, recording and playback modes.
Each time you press DISPLAY/MENU,
the display mode will change as shown
below:
On the current time display
If the unit is left unoperated for more than
3 seconds in the stop mode, the display will
show the current time, regardless of the
display mode setting.


Counter:
Elapsed playback/recording time in one
message

Remaining time (REMAIN):
In the playback mode: The remaining
time of one message indication. In
the stop and recording mode: The
remaining recording time indication.

Recorded date (REC DATE)*:
The date the current message was
recorded.

Recorded time (REC DATE)**:
The time the current message was
recorded.
* If the clock has not been set, “--Y--M--D” will
be displayed.
** If the clock has not been set, “--:--” will be
displayed.