Sony ICD-P620 - Turning off the Beep Sound; Changing the Recording Mode

ICD-P620 GB 3-295-268-11 (2)
36
GB
Turning o the Beep
Sound
BEEP ON: A beep will sound to indicate
that operation has been
accepted.
BEEP OFF: No beep sound will be heard
except for the alarm and
timer.
1 Press DISPLAY/MENU for more than
1 second until “MODE” appears in
the display window.
2 Press –  or + to display
“BEEP ON (or OFF)” and press
PLAY/ENTER.
“ON (or OFF)” will ash.
3 Press –  or + to select “ON”
or “OFF” and press PLAY/
ENTER.
The setting is completed.
4 Press (stop) to exit the menu
mode.
Changing the
Recording Mode
HQ: You can record with the high quality
sound (monaural sound).
SP: You can record with better sound
(monaural sound).
LP: You can record for longer time
(monaural sound).
1 Press DISPLAY/MENU for more than
1 second until “MODE” appears in
the display window.
2 Make sure that “MODE” is displayed
and press PLAY/ENTER.
“HQ (or SP, LP)” will ash.
3 Press –  or + to select “HQ,”
“SP” or “LP” and press PLAY/
ENTER.
Now the setting is completed.
4 Press (stop) to exit the menu
mode.
The setting becomes eective and the
normal screen will be displayed.
If the unit is left unoperated for more
than 3 seconds, the display will show
the current time and the selected
recording mode will be displayed.