Sony ICF-2001D - FM IF Alignment; FM IF Alignment Procedure

ICF-2001D/2010
FM I-F ALIGNMENT
Setup:
Band switch: FM
Frequency: clear spot
VOLUME control: as desired
from signal generator
-o-_oasM#t#"—_7
Q 46ND hot side @
FM rf signal
generator a-f distortion meter
LL]
+22.5 kHz frequency
deviation by 400 Hz
sign af earphone
Procedure:
. Adjust IFT F1 to obtain a maximum signal output
with the distortion meter set to level mode.
. Set the mode of distortion meter to distortion.
. Adjust L9 to obtain a minimum distortion at the
modulating signal 400Hz of the FM RF SSG.
. Repeat above steps to ensure alignment.
Adjustment Location:
— main board —