Sony ICF-6800W - Board Removals

MW BOARD REMOVAL
(Page 33)
@ MAIN BOARD REMOVAL
Remove the shaft of the @
FM tuning capacitor with :
taking
care
not
to
fall
the
tie
chassis
dial drum (A) down. ;
C1) Remove lead wires from the
preselector board.
an
4) Release chassis claw.
Q Remove the connector
and coaxial cable from
the preselector board.
main chassis
3) Remove screw, TAP 3 x &
@ SCALE DRUM REMOVAL
Note: When performing the dial-cord
stringing, remove the bottom
bracket after removing the screws.
| ICF-6800W
FM DIAL-CORD
STRINGING
(Page 34)
scale drum
4 } Release the dial cord.
@ e3x6 @pre3x 10
— 29 —
bottom bracket