Help Guide
Interchangeable Lens Digital Camera
ILCE-1 α1
Creative Look (still image/movie)
“Looks” are presets for image creation preinstalled on the camera.
With this function, you can choose the finish of the image by selecting a “Look.” In addition, you can fine-tune the
contrast, highlights, shadows, fade, saturation, sharpness, sharpness range, and clarity for each “Look.”
Menu item details
ST:
Standard finish for a wide range of subjects and scenes.
PT:
For capturing skin in a soft tone, ideally suited for shooting portraits.
NT:
MENU →
(Exposure/Color) → [Color/Tone] → [ Creative Look].
1
Select the desired “Look” or [Custom Look] using the top/bottom of the control wheel.
2
To adjust
(Contrast), (Highlights), (Shadows), (Fade), (Saturation), (Sharpness),
(Sharpness Range) and (Clarity), move to the right using the right side of the control wheel. Select the
desired item using the right/left sides, and then select the value using the top/bottom sides.
3
When selecting [Custom Look], move to the right using the right side of the control wheel, and then select
the desired “Look.”
Using [Custom Look], you can recall the same “Look” presets with slightly different settings.
4
To Next Page
