Help Guide
Interchangeable Lens Digital Camera
ILCE-1 α1
Finder Frame Rate (still image)
Display the subject’s movements more smoothly by adjusting the frame rate of the viewfinder during still image shooting.
This function is convenient when shooting a fast-moving subject.
Menu item details
Standard:
Displays the subject at a normal frame rate on the viewfinder.
High:
Displays the movements of the subject more smoothly on the viewfinder.
Higher:
Displays the movements of the subject more smoothly on the viewfinder than [High].
Note
When [
Finder Frame Rate] is set to [Higher], the viewfinder resolution becomes lower and the display magnification becomes
smaller.
When [
Finder Frame Rate] is set to [High] or [Higher], [Display Quality] becomes locked to [Standard].
Even if [
Finder Frame Rate] is set to [High] or [Higher], the frame rate may be restricted depending on the temperature of the
shooting environment and the shooting conditions.
The frame rate is restricted in the following situations:
During playback
During HDMI connection
When the temperature inside the camera’s body is high
When [Shutter Type] is set to [Electronic Shutter] or [Auto] and continuous shooting is performed.
Related Topic
Assigning frequently used functions to buttons (Custom Key Setting)
5-025-537-14(1)
Copyright 2021 Sony Corporation
MENU → (Setup) → [Finder/Monitor] → [ Finder Frame Rate] → desired setting.
This function can be assigned to key of your choice using [
Custom Key Setting].
1
To Next Page
Loading...
