Adjusted values such as contrast that you have changed as desired can be collectively reset for each “Look.” Press the
(delete) button on the adjustment screen for the “Look” that you want to reset. All adjusted values that have been
changed will return to their default values.
Hint
For [Sharpness], [Sharpness Range], and [Clarity], take a test shot and either enlarge and play it on the camera monitor, or
output it to a playback device to check the effect. Then, readjust the setting if needed.
Note
[
Creative Look] is fixed to [ST] in the following situations:
[Intelligent Auto]
[
Picture Profile] is set to other than [Off].
When this function is set to [BW] or [SE], [Saturation] cannot be adjusted.
In the movie mode, [Sharpness Range] cannot be adjusted.
5-025-537-14(1)
Copyright 2021 Sony Corporation
To Next Page
Loading...
