Help Guide
Interchangeable Lens Digital Camera
ILCE-1 α1
Image Jump Method
Sets the method for jumping between images during playback by operating a dial.
Menu item details
One by one:
Plays back images one by one.
By 10 images:
Jumps in units of 10 images.
By 100 images:
Jumps in units of 100 images.
Protect Only:
Plays back only protected images.
Rating Only:
Plays back all rated images.
Rating Only (
) - Rating Only ( ):
Plays back only images for which a rating (
to ) has been specified.
W/O Rating Only:
Plays back only images that are not rated.
Note
When [Image Jump Method] is set to [One by one], [By 10 images], or [By 100 images], one group is counted as one image.
When [Image Jump Method] is set to a parameter other than [One by one], [By 10 images], or [By 100 images], you can jump
between images only when [View Mode] is set to [Date View]
. When [View Mode] is set to a parameter other than [Date View],
images will be played back one by one even if you use the dial assigned using [Select Image Jump Dial].
When [Image Jump Method] is set to a parameter other than [One by one], [By 10 images], or [By 100 images], movies are
always skipped during jumping playback.
Related Topic
Rating
Protecting recorded still images (Protect)
Select Image Jump Dial
5-025-537-14(1)
Copyright 2021 Sony Corporation
MENU →
(Playback) → [Playback Option] → [Image Jump Method] → desired setting item.
1
To Next Page
Loading...
