Help Guide
Interchangeable Lens Digital Camera
ILCE-1 α1
Operating the camera from a computer (PC Remote Function)
Uses a Wi-Fi or USB connection, etc. to control the camera from a computer, including such functions as shooting and
storing images on the computer.
Select MENU →
(Network) → [Smartphone Connect] → [Smartphone Connection] → [Off] beforehand.
Menu item details
PC Remote:
Sets whether or not to use the [PC Remote] function. ([On] / [Off])
PC Remote Cnct Method:
Selects the connection method when the camera is connected to a computer using [PC Remote]
. ([USB]/[Wired
LAN]/[Wi-Fi Direct]/[Wi-Fi Access Point])
Connect without Pairing:
Selects whether to connect the camera to a computer without pairing when [PC Remote Cnct Method] is set to [Wired
LAN] or [Wi-Fi Access Point]. ([Enable]/[Disable])
Pairing:
When [PC Remote Cnct Method] is set to [Wired LAN] or [Wi-Fi Access Point], pair the camera with the computer.
Wi-Fi Direct Info.:
Displays the information needed to connect to the camera from the computer when [PC Remote Cnct Method] is set to
[Wi-Fi Direct].
Still Img. Save Dest.:
Sets whether or not to save still images to both the camera and the computer during PC Remote shooting. ([PC
Only]/[PC+Camera]/[Camera Only])
PC Save Image Size:
Selects the file size for images to be transferred to the computer when [Still Img. Save Dest.] is set to [PC+Camera]. The
original-sized JPEG/HEIF file or a 2M-equivalent JPEG/HEIF file can be transferred. ([Original]/[2M])
RAW+J PC Save Img:
Selects the file type for images to be transferred to the computer when [Still Img. Save Dest.] is set to [PC+Camera].
([RAW & JPEG]/[JPEG Only]/[RAW Only])
RAW+H PC Save Image:
Selects the file type for images to be transferred to the computer when [Still Img. Save Dest.] is set to [PC+Camera].
([RAW & HEIF]/[HEIF Only]/[RAW Only])
PC Save JPEG Size/PC Save HEIF Size:
Sets the image size to be saved to the computer when [Still Img. Save Dest.] is set to [PC+Camera]. ([Large Size]/[Small
Size])
MENU →
(Network) → [Transfer/Remote] → [PC Remote Function] → Select an item to set, and then
select the desired setting.
1
Connect the camera to the computer, and then launch Imaging Edge Desktop (Remote) on the computer.
You can now operate the camera using Imaging Edge Desktop (Remote).
The connection method between the camera and the computer depends on the setting for [PC Remote Cnct
Method].
2
To Next Page
Loading...
