Functions that can be selected using the MENU button
GB
38
(Custom Settings)
Wind Noise Reduct. Reduces wind noise during movie recording.
(On/Off)
Memory Registers the desired modes or camera settings.
Zebra Displays stripes to adjust brightness.
(Off/70 to 100/100+)
MF Assist Displays an enlarged image when focusing manually.
(On/Off)
Focus Magnif. Time Sets the length of time the image will be shown in an
enlarged form.
(2 Sec/5 Sec/No Limit)
Grid Line Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Audio Level Display Sets Audio Level Display.
(On/Off)
Auto Review Sets auto review to display the captured image after shooting.
(10 Sec/5 Sec/2 Sec/Off)
DISP Button Sets the type of information to be displayed on the LCD
screen or in the viewfinder by pressing DISP on the control
wheel.
(Graphic Display/Display All Info./No Disp. Info./Level/
Histogram/For viewfinder)
Peaking Level Enhances the outline of in-focus ranges with a specific color
when focusing manually.
(High/Mid/Low/Off)
Peaking Color Sets the color used for the peaking function.
(Red/Yellow/White)
Exposure Set. Guide Sets the guide displayed when exposure settings are changed
in the shooting screen.
(Off/On)
Live View Display Sets whether to reflect settings such as exposure
compensation in screen display.
(Setting Effect ON/Setting Effect OFF)
Phase Detect. Area
(ILCE-7 only)
Sets phase detection AF area.
(On/Off)
To Next Page
Loading...
