Does not enable exposure compensation with the front or rear dial.
Front dial/ Rear dial:
Enables exposure compensation with the front or rear dial.
Note
When the exposure compensation function is assigned to the front or rear dial, any
function that had been assigned to that dial previously is re-assigned to another dial.
When the exposure compensation dial is set to a position other than “0,” the settings of
the exposure compensation dial will be prioritized. For example, if you set [Exposure
Comp.] to +5.0EV, but the exposure compensation dial is set to +2.0EV, the “+2.0EV”
setting will be prioritized.
[93] How to Use
Using shooting functions Adjusting the exposure
Reset EV Comp.
Sets whether to maintain the exposure value set using [Exposure Comp.] when you turn off
the power when the exposure compensation dial position is set to “0.”
1. MENU → (Custom Settings) → [Reset EV Comp.] → desired setting.
Menu item details
Maintain:
Maintains the settings of [Custom Settings].
Reset (default setting):
Resets the settings of [Exposure Comp.] to “0.”
[94] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Drive Mode
You can set the drive mode, such as continuous or self-timer shooting.
1. MENU → (Camera Settings) → [Drive Mode] → desired setting.
Menu item details
To Next Page
Loading...
