Sony ILME-FX3 User Manual

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3 Ver.2 or later
Save/Load Settings
You can save/load camera settings to/from a memory card. You can also load settings from another camera of the same
model.
Menu item details
Load:
Loads the settings from a memory card to this camera.
Save:
Saves the current settings of this camera to a memory card.
Delete:
Deletes the settings saved on a memory card.
Settings that cannot be saved
The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting
parameters, such as, [Focus Magnifier], are not listed.)
(Shooting)
IPTC Information
Copyright Info
(Exposure/Color)
External Flash Set.
White Balance: Custom 1/Custom 2/Custom 3
(Focus)
Face Memory
(Network)
FTP Transfer Func.*
WPS Push
Access Point Set.
Wi-Fi Frequency Band
IP Address Setting
Edit Device Name
Import Root Certificate
Access Authen. Settings**
Security(IPsec)
MENU →
(Setup) → [Reset/Save Settings] → [Save/Load Settings] → desired item.
1
You can save or load settings under [FTP Transfer Func.] by selecting MENU →
(Network) → [Transfer/Remote] → [FTP Transfer Func.] →
[Save/Load FTP Settings]. For details, refer to the “FTP Help Guide.”
https://rd1.sony.net/help/di/ftp_2210/h_zz/
*
When the camera's system software (firmware) is Ver.3.00 or later.
**
446

Sony ILME-FX3 Specifications

General

Brand	Sony
Model	ILME-FX3
Category	Digital Camera
Language	English