Next, select [Remote Shoot (PC Remote)] on the monitor connected to the camera.
Hint
In [Remote Shoot Setting] under [ Cnct./PC Remote], you can set the save destination and saved format of still images for PC
remote shooting.
When [Access Authen.] is set to [Off] and you are connecting via a Wi-Fi access point, you need to pair the camera with the
computer. Select MENU → (Network) → [ Cnct./PC Remote] → [PC Remote Function] → [Pairing] after Step 1, and then
pair the camera and the computer using Imaging Edge Desktop (Remote) on the computer. Pairing information is deleted when
you initialize the camera.
TP1001215200
5-055-988-11(1) Copyright 2023 Sony Corporation
To Next Page
