To select the focusing method ( Focus Mode/ Focus Area)
Select (Continuous AF) or (Manual Focus) for [ Focus Mode]. You can specify the focus area by setting
[ Focus Area].
Even during shooting with manual focus, you can temporarily switch to auto focus in the following ways.
Press the custom key to which [AF On] is assigned, or press the shutter button halfway.
Press the custom key to which [Subject Recognition AF] is assigned.
Hint
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
To prevent the operating sound of the zoom ring from being recorded when a power zoom lens is used, we recommend recording
movies using the zoom lever of the lens. When moving the zoom lever of the lens, be careful not to flip the lever.
Note
An icon indicating that data is being written is displayed on the external monitor after shooting. Do not remove the memory card
while the icon is displayed.
You cannot start recording a movie while writing data. Wait until data writing is completed and “STBY” is displayed before
recording a movie.
If the (Overheating warning) icon appears on the external monitor, the temperature of the camera has risen. Turn the power
off and cool the camera and wait until the camera is ready to shoot again.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When movie recording is finished, you
can record another movie by pressing the shutter/MOVIE (Movie) button again. Recording may stop to protect the product,
depending on the temperature of the product. In such cases, turn the power off and cool the camera and wait until the camera is
ready to shoot again.
Still images cannot be captured during movie recording.
When the power is turned on, the internal temperature of the camera rises even if the camera is not shooting. If the power is
turned on for a long time, then the power turns off or you are unable to record movies, leave the power off and wait until the
temperature drops sufficiently.
Related Topic
File Format (movie)
Movie Settings (movie)
Selecting the focus method (Focus Mode)
Selecting the focus area (Focus Area)
Assigning frequently used functions to buttons (Custom Key Setting)
Recordable movie times
TP1001175429
5-055-988-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
