Help Guide
Interchangeable Lens Digital Camera
ILX-LR1
Shoot Mode: Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
Hint
You can change the shutter speed and aperture (F-value) combination without changing the set exposure value (Manual shift).
Assign [AEL hold] or [AEL toggle] to a desired key using [
Custom Key Setting] or [ Custom Key Setting], and then turn the
control wheel while pressing that key.
Note
The Metered Manual indicator does not appear when [ ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
Related Topic
ISO (still image/movie)
Bulb shooting
Set the Still/Movie/S&Q switch to the desired shooting mode.
If S&Q (slow-motion/quick-motion) is selected and [Shoot Mode Sel. Screen] is set to [Display], the [
Shoot Mode] screen in Step 2 will be displayed at this point.
1
MENU →
(Shooting) → [Shooting Mode] → [ Shoot Mode]/[ Shoot Mode]/[ Shoot
Mode] → [Manual Exposure].
2
Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control
wheel to select a value.
You can also set [ ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [ ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for
appropriate exposure. If this happens, change the shutter speed or aperture value.
When [ ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the camera.
3
Indicates under/over for appropriate exposure.
*
Adjust the focus and shoot the subject.
4
To Next Page
Loading...
