Cable System
and/or VHF/UHF
Antenna System
ANT button
Connecting a cable system and/or an external VHF/UHF antenna to the
VHF/UHF input and or CABLE will allow you to enjoy high definition and
standard definition digital programming (if available in your area) along
with the standard definition analog programming
_ This TV is capable of receiving unscrambled digital programming
for both cable (QAM and 8VSB) and external VHF/UHF antenna
(ATSC).
Rear ofTV
75-ohm Coaxial cable
W_r/OHF
75-ohrn Coaxialcable
CABLE
To switch between the VHF/UHF (antenna) input and the CABLE input,
press the ANT button on the remote control.
<b
radio noise.
23
To Next Page
Loading...
