Sony KDL-32S3000 User Manual

- 19 -
SE1A
RM-ED009
TT mode is available by setting the TV for operation in Service Mode [ As shown on Page 17 ] , OSD ‘TT’ appears. The functions described
below are available by selecting the two numbers. To release the ‘Test mode 2’, press 00, 10, 20 ... twice or switch the TV set into Stand-by
mode. In ‘TT Menu’ mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the Speaker
OFF button a second time will cause the Menu to reappear. The function is kept even when the menu is not displayed on screen !!.
3-2. TT MODE
59
Visual I2C toggle
61
Auto AGC
63
AM from baseband (AFRIC dem) or from RF (MSP
dem)
64
HDMI number of inputs (2 or 3)
65
DDC enable
66
HDMI EDID WP enabled
67
MSP Auto Carrier Mute function enable/disable
68
Set 26" settings AUO panel
69
Set 32" settings AUO panel
71
Set 40" settings Samsung panel
72
Set 46" settings Samsung panel
75
Set centred balance
76
Set volume to maximum
77
Set volume to minimum
78
Set balance full left
79
Set balance full right
81
Digital BER display
82
Digital Service menu
83
Digital colour bar output from DENC
84
TS CI path through
85
Digital tuner power down (Only 1 power cycle,default
is no power down)
86
Switch between two digital SW banks
87
Local keys test
88
Digital shipping conditions (Clear tune database)
89
LED test
91
OAD enable/disable toggle
92
TS CI path through with Reed Solomon off
93
LNA toggle
94
Spread spectrum toggle
96
Digital debug output enable/disable
97
Digital 656 output enable/disable
98
Digital auto reset function enable/disable
99 Display error and working time menu
00
'TT' mode off
03
Set volume to 35%
04 Set volume to 50%
05
Set volume to 65%
06
Set volume to 80%
07
Ageing mode (TV key switches off)
08
Shipping Condition
16
Picture level 50%
19
Factory toggle mode ("Fact" or "Norm")
24
UK Destination
25
AEP Destinations
27
CBA mode toggle (On for factory mode)
31
ECS mode toggle (ON/OFF)
32
Set BCN channels preset
34 WCG configuration toggle
36
Clock display toggle
37
Hotel mode toggle
38 OTRUM mode
39
Enable Digital Test
41
Re-initialise NVM
43
Select Dual Sound "A"
44
Select Dual Sound "B"
45
Select Dual Sound "Mono"
46
Select Dual Sound "Stereo"
48
Set NVM as non-virgin (CH59 only)
49
Set NVM as virgin (CH59 only)
51
Watchdog toggle
52
WCG restore
53
WCG user functionality
54 Tuner toggle
55 Audio delay toggle
56
Reset all channel attenuation
58
Chip select toggle
All manuals and user guides at all-guides.com

Sony KDL-32S3000 Specifications

General

Audio system	B/G, D/K: R1-R12, R21-R69, I: UHF B21-B69, L: F2-F10, B-Q, F21-F69, NICAM
On Screen Display (OSD)	Yes
Headphone outputs	1
HDMI ports quantity	3
SCART ports quantity	2
Response time	8 ms
Display diagonal	32 \
Display brightness	450 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Product color	Black
Power consumption (standby)	0.3 W
Power consumption (typical)	149 W

Weight and Dimensions

Depth (with stand)	214 mm
Width (with stand)	790 mm
Height (with stand)	581 mm
Weight (with stand)	16500 g
Depth (without stand)	100 mm
Height (without stand)	530 mm