Sony KLV-40W400A - Connecting Antenna, Cable, and VCR; Preventing the TV from Toppling Over

5
GB
Start-up Guide
3: Connecting an
antenna/cable/VCR
4: Preventing the TV
from toppling over
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M5 × 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord.
Connecting an antenna/cable
Antenna cable (not supplied)
Audio/Video
cable (not
supplied)
S-Video
cable
(not
supplied)
Connecting an antenna/cable and VCR
Antenna
cable (not
supplied)
Antenna cable (not
supplied)
VCR