Adjustment Using the Menus
18
Page 2
Color temperature
Gamma
Brightness
Contrast
Chroma
Aperture
Backlight
Page 3 (for the SDI signal input)
Payload ID
Video standard
Bit depth
Sampling structure
Picture rate
Scanning method
Page 3 (for the HDMI signal input)
Pixel encoding
RGB range
Color depth
Matrix
fH
fV
Page 3 (for the composite signal input)
Phase
V sharpness
NTSC setup
ACC
Shift H
Shift V
Page 4
Model name
Serial No.
Software version
FPGA version
Operation Time
[Color Temp/Gamma] menu
This menu is used for adjusting the color temperature
and gamma.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta Color Analyzer CA-
210/CA-310
Submenu Setting
[Color Temp] Selects the color temperature from
among [D65], [D93], [User1], [User2].
To Next Page
Loading...
