40
Missing V3B Timing signal to imager/pin 3
Description: Total loss of vertical signal transfer. Only
the last line is output because the horizontal timing
pulses are present. The picture consists of purple,
dark red
and black lines.
Missing V4 Timing signal to imager/pin 1
Description: Loss of vertical timing signal
produces vertical lines in the crimson/black
picture.
Missing RG Output Clock pulse to imager/pin 14
Description: The RG pulse clocks the CCD output
signal from the imager. When RG is absent, there is
no CCD output (black screen).
Missing H2 Timing signal to imager/pin 16
Description: One of the two horizontal signals
used to carry the CCD voltages (charges) out of
the imager is missing. Black and crimson
onal lines are the result.
To Next Page
Loading...
