Sony MG110 - Specifications

Additional Information
35
Specifications
Amplifier section
MHC-MG510AV/MG310AV/MG110
U.S.A. models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
120 – 10,000 Hz; rated 75 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
MHC-MG510AV
Front speaker:
Continuous RMS power output
75 + 75 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.09%
(8 ohms at 1 kHz,
40 watts)
Center speaker:
Continuous RMS power output
45 watts
(8 ohms at 1 kHz,
10% THD)
Rear speaker:
Continuous RMS power output
45 + 45 watts
(8 ohms at 1 kHz,
10% THD)
Sub woofer:
Continuous RMS power output
45 watts
(8 ohms at 100 Hz,
10% THD)
MHC-MG310AV
Front speaker:
Continuous RMS power output
75 + 75 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.09%
(8 ohms at 1 kHz,
40 watts)
Center speaker:
Continuous RMS power output
25 watts
(8 ohms at 1 kHz,
10% THD)
Rear speaker:
Continuous RMS power output
25 + 25 watts
(8 ohms at 1 kHz,
10% THD)
MHC-MG110
Continuous RMS power output
75 + 75 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.09%
(8 ohms at 1 kHz,
40 watts)
Inputs
VIDEO/MD IN (phono jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
5.1CH (MHC-MG510AV/MG310AV only):
FRONT (phono jacks): voltage 450 mV,
impedance 47 kilohms
REAR (phono jacks): voltage 450 mV,
impedance 47 kilohms
CENTER (phono jack): voltage 450 mV,
impedance 47 kilohms
SUB WOOFER (phono jack):
voltage 450 mV,
impedance 47 kilohms
continued