MHC-EC68USB.GB.3-294-664-11(1)
17
GB
Basic Operations
Folder and le generation rules
When rst recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and les are
generated within this “MUSIC” folder
as follows according to the recording
method.
Synchro Recording
1)
Recording
source
Folder name File name
MP3 Same as the recording source
2)
CD-DA “FLDR001”
3)
“TRACK001”
4)
REC1 recording
Recording
source
Folder name File name
MP3
“REC1”
5)
Same as the
recording
source
2)
CD-DA “TRACK001”
4)
1)
In Program Play mode, the folder name is
“FLDRxxx,” and the le name depends on the
recording source (CD-DA disc or MP3 disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereaer.
4)
File numbers are assigned serially thereaer.
5)
A new le is recorded in the “REC1” folder
each time REC1 recording is performed.
To remove the USB device
1
Check that there is no data being
transferred through the USB device
while recording, erasing, etc.
2
Hold down
on the unit until
“NoDEVICE” appears on the display.
3
Remove the USB device.
Tip
You can also remove the device safely aer the
system is turned o.
To erase MP3 les or folders from the
USB device
You can erase MP3 les or folders from
the USB device.
1
Connect a recordable USB device to
the (USB) port
.
2
Select the USB function.
Press USB
.
3
Press /
or +/
repeatedly to select the MP3 le or
folder you want to erase.
4
Press ERASE
on the unit.
“TRACK ERASE” or “FOLDER
ERASE,” and “PUSH ENTER” appear
alternately in the display.
To cancel the erase operation, press
.
5
Press ENTER
.
e selected MP3 le or folder is
erased.
Continued