MHC-EC68USB.GB.3-294-664-11(1)
23
GB
Other Operations
Other Operations
Creating your own
program
(Program Play)
Use buttons on the remote to create your
own program.
1
Select the desired function.
CD
Press CD
to select the CD
function.
USB
Press USB
to select the USB
function.
2
Press PLAY MODE
repeatedly
until “PGM” appears while the
system is stopped.
3
Press DISC SKIP
repeatedly to
select a disc.
4
Press /
repeatedly
until the desired track or le
number appears.
When programming MP3 les, press
+/
repeatedly to select the
desired folder, and then select the
desired le.
Selected track or le number
Total playing time of the selected track
5
Press ENTER
to add the track
or le to the program.
CD
“ . ” appears when the total
program time exceeds 100 minutes
for a CD or when you select an MP3
le.
USB
e total program time cannot be
displayed, so “ . ” appears.
6
Repeat steps 3 through 5 to
program additional tracks or
les, up to a total of 25 tracks or
les.
7
To play your program of tracks
or les, press
.
e program remains available until
you open the disc tray or remove
the USB device. To play the same
program again, press
.
To cancel Program Play
Press PLAY MODE
repeatedly until
“PGM” disappears while the system is
stopped.
To delete the last track or le of the
program
Press CLEAR
while the system is
stopped.
To view program information, such as
total track number of the program
Press DISPLAY
repeatedly.
To Next Page
Loading...
